8
2.5 Working status display ligh
t
Standby :Green light flashing
Discharge : Green light normally on
Trouble/alarm
：
Red light normally on
Charging: Blue light normally on
Alarm
When the red light is on, some parameters of the battery have reached the warning
value, or the battery has begun to be protected, BMS will send a warning when the
battery is being charged or discharged
.
But after the battery protection, some
functions of the battery can not be used.
2.6 Operation
Power Switch
ON
/
OFF
To power on the whole battery system, no power output.
Power Connector
There are two sets of power connectors in the operation area, as shown in the
figure, the one on the left is the positive pole, and the one on the right is the
negative pole. The polarity of the power connectors in the same group is the same,
and the battery can be connected in parallel or the inverter can be connected.
Please remove operation plate to find operation area.
Please wire in cables from bottom inlets firstly.
Please use standard M6 lug to install cable and connectors.
ADDr
RS232
RS485
Web: marketing-anern.com | Email: [email protected] | Whatsapp: +86 13058030989