Anemoment TriSonica Mini, Руководство пользователя

Страница: 21 / 36

19 Release Date 9 July 2021 Anemoment LLC
Table 9: Serial Commands in the Command Line Interface
COMMAND DESCRIPTION
help Displays a list of CLI commands.
help <command> The command word “help” followed by the
name of another command displays detailed
help for that command.
exit Leave the CLI and return to sampling.
baudrate [<baud> [now]] Show or set the current baud rate
calibrate <temp> [<rh>]
Start an anemometer calibration cycle. See the
anemometer calibration Chapter of this
document for more details about the
anemometer calibration procedure.
compasscalibrate YES Start a compass calibration cycle. (Not available
on TSM-WS) See the compass calibration
Chapter of this document for more details
about the compass calibration procedure.
decimals [<param>] Set the number of decimals places of a Display
Parameter or a Group of Parameters. See the
Show, Hide, Tag, Untag, and Decimal Commands
section in this document.
declination [<value>]
Set/Read the true heading declination offset
Diagnostic [details|clear] Performs a self-diagnostic and reports problems
found with the TSM. The details parameter
gives a more detailed diagnostic output. The
clear parameter clears the error counts display
of the details parameter
display Show the current Display Mode settings. See the
Display Commands section in this document.
expert enable|disable Enable or Disable Expert Menu Command Items.
See the section on Expert Mode
hide [<param>]
Hide Display Parameter Groups. See the Show,
Hide, Tag, Untag, and Decimal Commands
section in this document.
levelcalibrate YES Start a level calibration cycle. (Not available on
TSM-WS) See the compass calibration section of
this document for more details about the
compass calibration procedure.