Anemoment LLC
26
Data Logger 422 User Manual
Menu Interface Mode (MIM)
When the DL422 has been connected to a terminal emulator program the data stream produced by
the DL422 begins scrolling up the screen. This is normal
Sampling Mode.
If an SD Card has been
inserted into the DL422, the data is saved in the storage file on the SD Card.
IMPORTANT:
When the DL422 is in MIM all data sampling is
stopped
, and the storage file is
closed
.
A
LL INCOMING DATA ARE LOST WHILE THE
DL422
UNIT IS IN
MIM.
•
Enter
MIM by
pressing the ESC key
on the keyboard of the computer to which the
DL422 has been attached as described above. The user will then see the Main Menu on
the terminal emulator screen.
•
Exit
MIM from the Main Menu by
pressing either the X or Zero key:
IMPORTANT:
X is TEMPORARY.
0 (Zero) is STORED.
Pressing the
X
exits MIM and returns the DL422 to Sampling Mode. All settings changes
made while in Menu Interface Mode are
TEMPORARY
and are
active
ONLY
until the
next
reset
. After a reset the settings return to the previously stored settings.
Pressing the
0 (zero)
exits the Menu Interface Mode and returns the DL422 to sampling
mode. All settings changes made while in the menu are
STORED
and
remain
in memory
for use after any reset.
General Use Description – Main Menu
The MIM Main Menu lists sub-menus for configuring equipment function and data stream settings.
To enter a sub-menu, press the letter key shown to the left of the option on the menu list.
Figure 11: Main Menu
Содержание Data Logger 422
Страница 1: ...Data Logger 422 User Manual...
Страница 8: ...Anemoment LLC 6 Data Logger 422 User Manual...
Страница 16: ...Anemoment LLC 14 Data Logger 422 User Manual...
Страница 52: ...Anemoment LLC 50 Data Logger 422 User Manual...