A
B
C
03/21
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
A Setago lamp
B Micro USB charging cable
C LED G4 3W dimmable light bulb
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- This lamp is for indoors use only. It can be taken
outdoors, but must be kept and stored indoors.
- Batteries must be disposed of according to local
environmental laws for waste disposal.
Cleaning instructions
- Wipe the surface with a soft, damp sponge or cloth, and
wipe immediately after with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit,
turpentine, household glass cleaner or cellulose thinner.
&Tradition will not accept any responsibility for any
accidents or injuries that occurs due to the use of incorrect
battery/LED light bulb. The battery must be removed from
the luminaire before it is scrapped; the appliance must be
disconnected from the supply mains when removing
the battery; the battery must be disposed safely.
For LED bulb and battery information or inquiry,
please do not hesitate to contact &Tradition by mail on
Step 1
The lamp is delivered with the shade already attached,
but without the light source installed.
To install the light source, unlock the shade by turning
clockwise and lift it up from the base.
Step 2
Install the light source by inserting the LED bulb into
the socket.
Lower the shade onto the base and fasten it by turning
the shade counterclockwise.
Step 3
Before use, the battery in the lamp need to be charged.
Plug in the micro USB cable into the USB port in the bottom
of the base and connect the USB cable to a power supply.
For indoor
Input 5.0V 600mA USB cable
G4 Max 3 Watt dimmable LED bulb
1 × Rechargeable &Tradition battery
Charging time: 8 hours
Operating time in highest light setting: 10 hours
Setago JH27
Jaime Hayon
2019
