Andrisoft wanguard 6.2, Руководство пользователя

Страница: 103 / 131

Wanguard 6.2 User Guide Reports » Servers
for the partitions that store the paths.
◦
Database/Graphs/SSD/Packet Dumps/Flow Collector Disk - Free Inodes – Free inodes held by the
partitions that store the paths.
◦
Database/Graphs/SSD/Packet Dumps/Flow Collector Disk - Ops/s – Reads and writes made on the
partitions that store the paths.
◦
Database/Graphs/SSD/Packet Dumps/Flow Collector Disk - Bytes/s – Bytes/s on the partitions that
store the paths.
◦
Server Interface(s) - Packets/Bits/Errors/Dropped – Interface statistics collected for the network
interfaces defined in the Configuration » Servers.
●
Graphs Size – Select a predefined dimension or enter a custom one in a “<X> x <Y>” format, where <X>
and <Y> are the X-axis and Y-axis pixels.
●
Graphs Title – Graphs can have an automatically-generated title for the “Auto” option or title for the
“None” option, or you can enter your own text to be rendered as a title.
●
Graph Legend – Select the level of detail for the graph legend.
●
Consolidation – If you are interested in spikes, choose the MAXIMUM aggregation type. If you are
interested in average values, choose the AVERAGE aggregation type. If you are interested in low values,
choose the MINIMUM aggregation type.
●
Group Servers – Generate a single graph for the selected servers.
●
Group Interfaces – Generate a single graph for the interfaces of the selected servers.
●
Stack Servers – Shows the summed up, stacked values for the selected servers.
Server Events
Lists events generated by the selected server(s). The events are described in the “Event Reporting” chapter
on page 69.
Console Events
The sub-tab is visible only when opening the Console tab. It lists events generated by Console. Events are
described in the “Event Reporting” chapter on page 69.
Server Commands
Console administrators can execute CLI commands on the selected server(s) and see the output in this sub-
tab. The commands are executed by the WANsupervisor service with the “andrisoft” user (non-root) privileges. To
prevent the execution of CLI commands through Console, start the WANsupervisor service with the “-n” option.
- 103 -