Andrew MP2003B, Руководство пользователя

Страница: 1 / 9

M0041AFM.doc
User's Guide MR2003B/D
TABLE OF CONTENTS
1. Installation and Setting to Work .........................1
2. Quick-Start Checklist ...........................................1
3. Mechanical Installation ........................................1
4. Wall Mounting .......................................................1
5. Configuration of the LEDs and Connectors ......2
6. Functional Description.........................................2
7. Cabinet Drawing ...................................................3
8. Mechanical Specification.....................................3
9. Environmental and Safety ...................................3
10. Additional Features of the MR2003 ....................3
10.1. Channel Setting 3
10.2 . Center Frequency 4
10.3. Center Frequency Offset 4
10.4 . Attenuation Setting 5
11. Alarming and Supervision ...................................5
11.1. Functional Description of the Alarming-Interface 5
11.2. Output-Contact Configuration 5
11.3. Output-Contact Descriptions 6
12. Heartbeat Setting..................................................6
13. Application ............................................................7
13.1. Repeater Supervision via SMS Transmitter 7
13.2. Repeater Supervision via Party-Line 7
13.3. Repeater Supervision via Party Line and SMS
Transmitter
7
14. The MR2003B/D-SMS – Optional Equipment .....8
15. List of Changes.....................................................9
1. Installation and Setting to Work
The electrical installation has to be performed in
accordance with the safety regulations of the local
authorities. Due to safety reasons the electrical
installation must be performed by qualified
personnel only. The repeater must not be opened.
The antennas of the repeater (integrated and / or
external) have to be installed in a way that the
regional and national RF exposure compliance
requirements are met.
The MR2003 is only intended for indoor
usage!
2. Quick-Start Checklist
†
Adjust channel(s); see chapter 10.1 .
†
Mount the repeater; see chapter 4 .
†
Install antennas (donor and coverage antenna)
†
Provide the repeater with power.
†
Adjust the attenuation; see chapter 10.4 .
Start the adjustment with the maximum attenuation
and decrease attenuation until the ALC becomes
active and the ALC alarm LED lights up. Then
increase attenuation until the ALC alarm is inactive
again.
or
†
Select ‘Auto-setup’; see chapter 10.4 .
†
Check the LEDs of the repeater; see chapter 11 .
3. Mechanical Installation
The mechanical installation has to be done according
to the instruction in the following chapter. Mount the
unit horizontally only.
4. Wall Mounting
The miniRepeater may only be mounted
horizontally to a
wall according to the above
drawing to ensure the natural convection
cooling. Do
not mount the miniRepeater to the
ceiling!
Always choose a mounting location that
avoids condensation
!
Wall
Mounting
bracket
miniRepeater
V1550_X03