ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
99/166
6.2
PERFORM SPRAYING OPERATIONS
Select the correct speed range.
Drive the machine in the orchard and start spraying.
6.2.1
Spraying with manual controls
Open the nozzles sections by the switches (sw1) and (sw2) on the joystick.
To open or close all the sections at the same time, use the main switch (P3).
When nozzles sections are open, lights (HL1) and (HL2) are ON.
When nozzles sections are closed, light (HL3) is ON.
Adjust the spray pressure by the switch
on the steering column.
When shutting off one nozzles section, pressure could have a small variation depending on the type,
the number of nozzles opened and spray pressure value.
Consider this variation when setting the spray parameters.
During spraying operations, it is very important to keep speed and pressure constant.
Always check ground speed and spray pressure to ensure an efficient and uniform spray application.
