ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
23/166
2.15
SAFETY INSTRUCTIONS FOR USE AFTER LONG STOP
Before using the machine for the first time, or after a long period of inactivity, follow these steps:
Check the battery and level of electrolyte..
Check level of all fluids: water cooling liquid, oil, hydrostatic transmission oil, fuel.
Check oil level of all gear boxes.
Check oil level of chemicals pump.
Check the tightening of fixing screws of main components.
Check that the all components of the machine are properly assembled.
Check all flexible hoses and replace if necessary.
Check all piping and fittings for oil leaks.
Check all clamps and fittings.
Grease all moving components.
Check that the machine has no damages.
Check that all mechanical components are functional and not rusty. Execute service operations if necessary.
Check tyres.
Check all lights and electric system.
Check braking system.
Check that all safety protections are properly fitted.
Make sure main chemicals tanks is clean.
Make sure that suction filter and all other filters of spray equipment are clean.
Make sure that the fan and the conveyor are clean and there are no obstacles inside and no damages.
Make sure that all safety protections are properly fitted and functional.
Check chemicals pump diaphragms and pressure accumulator.
Make sure that the nozzles are not damaged or worn out.
Start the engine and let it run for some minutes at low revs to warm up.
