ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
122/166
7.6.3
Engine coolant
Coolant expansion tank is integrated inside the water section of main cooler.
Check periodically the coolant level and add if necessary.
Do NOT remove the cap (1) when the engine is running.
Before removing the cap, wait at least four hours after the engine stop.
Remove the cap slowly; cooling circuit is in pressure and the cooling liquid, especially when warm,
could exit violently.
1)
Coolant section cap
The liquid added must be in compliance with specifications of the engine Manufacturer.
Do not use water with chemical additives as this could cause damages to the cooling system.
During cold seasons check frequently the specific density of the cooling liquid to ensure optimal protection
to the engine.
7.6.4
Fuel tank
Keep the fuel tank cleaned. Periodically drain condensed water.
1)
Fill cap
2)
Drain plug
To empty the tank, remove the drain plug.
2
1
1
