manualshive.com logo in svg

Andor Technology Zyla sCMOS 4.2 PLUS, Руководство по оборудованию

Поделиться
Скачать
Andor Technology Zyla sCMOS 4.2 PLUS Скачать руководство пользователя страница 61

version 2.0 rev 18 Feb 2021

61

3.7   Checking & Setting BIOS options (for PCs not supplied by 
Andor)

Enter the BIOS menu when starting PC. For Dell workstations, press F12 at start-up and select System Setup 
in the One Time Boot Menu.  For Dell workstations 3 options in the Performance menu of the BIOS need to be 
checked/set:  

•   C-States Control – Disable C-States

•   Intel Speed-step – Disable Speed-step 

•   Memory Node Interleaving – Set from NUMA to SMP.  Note: This option is only available on larger 

workstations with 2 physical processors and may have a different name- ensure that NUMA is disabled.

3.8   Software Support

Please see the 

Third Party Imaging Software Support

 page for further information on supported software. 

Please refer to the application Help for details on how to control any Zyla specific functionality. Andor SDK3 

documentation is provided in the 

Andor Software Development Kit 3.pdf

 file that comes with the installation 

package if this has been ordered as an option.

Содержание Zyla sCMOS 4.2 PLUS















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды