Anderson SMARTMIX A1230FD, Руководство оператора

Страница: 37 / 129

Anderson Group Mixer – Operator's Manual 35
2 Safety precautions
Your Anderson Equipment type (e.g. trailer, blower) was designed to minimize risk to the operator.
Nevertheless, it must only be used for its intended purpose. Misuse of the Equipment type (e.g.
trailer, blower) may result in injury to the operator.
The Equipment type (e.g. trailer, blower) has a hydraulic system and moving mechanical parts. All
these parts may cause serious and even fatal injuries to people and animals. It is strongly
recommended that you carefully read and follow the guidelines below.
2.1 Basic safety guidelines
2.1.1 General
l
Follow the safety tips and instructions in all sections of this guide.
l
Always follow the safety guidelines shown in the pictograms on your equipment.
l
Remember that vigilance and caution are the best tools for staying safe.
l
Maintain your equipment properly. Proper maintenance will make your equipment safer, more
effective and longer lasting.
l
Always leave safety devices in place. If they have been removed or damaged, do not use your
Equipment type (e.g. trailer, blower) until they have been replaced or fixed.
l
Wear protective clothing. Avoid scarves, jewelry, long hairstyles and loose clothing (pants,
shirts or coats) that can easily get stuck in the equipment’s moving parts.
l
Always follow all accident prevention, safety, occupational health, environmental protection
and traffic rules and regulations.
l
On public roads, follow the rules of the road and obey the 40 km/h (25 mph) speed limit.
l
The equipment must be operated by a single trained individual. The owner must train any
trainees or other temporary external help and inform them of the safety and operating rules.
l
All people, animals and obstacles must be clear of the equipment before and during operation.
l
The equipment must never be used to transport people, animals or objects other than those
for which the trailer was designed.
l
Never attempt to remove material from the equipment before the equipment and tractor have
come to a complete stop.
l
Always turn off the tractor engine before working on the equipment (greasing, adjustments,
maintenance). Disconnect all power sources (drive shafts, hydraulic and electrical
connections).
l
Before working on the equipment, ensure that it cannot be started accidentally.
l
Completely shut down the equipment if you detect any unusual noises or vibrations. Locate
and eliminate the cause of the noise or vibration before proceeding. Call your dealer if
necessary.
l
Before each use, check the screws, nuts and couplings and tighten them as needed.
l
Before each use and after adjustments and maintenance, ensure that all safety devices are in
place, locked and in good condition.