Anderson SMARTMIX A1230FD, Руководство оператора

Страница: 83 / 129

Anderson Group Mixer – Operator's Manual 81
5.4 Distribution
1. Ensure that the restrictor blades are disengaged (outside the mixing chamber).
2. Engage the tractor's PTO:
l
A280, A380, A520 and A700: 540 or 1,000 rpm.
l
A950 and A1230: 1,000 rpm.
3. Adjust the conveyor:
l
For machines with a hydraulic horizontal conveyor, use the hydraulic tractor controls or
the SMART Control remote to adjust the offset of the conveyor.
l
For machines with an inclined conveyor, use the hydraulic tractor controls or the SMART
Control remote to adjust the incline of the conveyor.
4. Turn on the conveyor and select an appropriate speed for the ration.
5. Open the distribution hatch as far as needed based on the texture and quantity of the mixture
to distribute. For fibre-based rations, open the hatch two thirds of the way. For corn-based
rations, open the hatch halfway.
6. Move the tractor forward at a suitable speed for the quantity of material to distribute.
7. At the end of distribution, select high speed (if your machine has the optional two-speed
gearbox) to help empty the mixing chamber completely.
8. Once distribution is complete, stop the tractor PTO.
9. Close the distribution hatch.
10. Raise the inclined conveyor or centre the horizontal conveyor.
11. Depressurize the hydraulic system.
5.5 Cleaning the magnetic extractor
Before doing any work in the mixing chamber,
follow the safety guidelines in "Mixing chamber" on
page 42.
After each distribution, the magnetic extractor must be cleaned to prevent any metal particles from
getting into the next mixture.
1. Put the safety valve lever (see A) for the hydraulic hatches in closed position (see 1) to
prevent the hatches from closing accidentally.
2. Remove any dirt or particles that were collected by the magnetic extractor (see B).
3. Once the operation is complete, put the safety valve lever (A) for the hydraulic hatches in
open position.