Anderson SMARTMIX A1230FD, Руководство оператора

Страница: 74 / 129

72 Operator's Manual – Mixer Anderson Group
Figure 34 — Inclined Conveyor Lowered
The angle of the inclined conveyor can be adjusted by direct drive with the tractor hydraulic controls
or by SMART Control with the SMART Control remote (see "Controls" on page 75).
4.9 Configuring the auger knives
Before entering the mixing chamber, unhitch the
tractor from the machine to prevent it from starting
accidentally.
Use safe and stable means of access and ensure
that the mixing augers and the inside of the mixing
chamber are clean.
Wear protective equipment (gloves, goggles, etc.)
and use appropriate tools.
4.9.1 Configuring the knives for A280 and A380 mixers
The mixer augers always ship with 10 knives (without an auger extension) or 12 knives (with an
auger extension). If you have very little material to cut or just want to mix it, you can remove knives
2, 4, 6 and 8 (see Figure 35). This will reduce the power demand on the machine.
4.9.2 Configuring the knives for A520 and A700 mixers
For twin-auger mixers, the knives can be configured three ways (see Table 10 and Figure 35).