Anderson SMARTMIX A1230FD Скачать руководство пользователя страница 126

Страница: 126 / 129

124

Operator's Manual – Mixer

Anderson Group

Figure 71 — Spaces Provided for Cleaning the Conveyor

7.14.3 Cleaning supplies

Do not use harsh (chlorinated) cleaning products.

Use lint-free rags or soft brushes.

7.14.4 Post-cleaning inspection

After cleaning, check the hydraulic hoses for leaks or damage and ensure that the couplings are
tight.

Immediately repair any damage.

Check that all the bolts are tight.

7.15 Storage

For extended storage:

Clean the machine (see "Maintenance schedule" on page 98).

Store the machine with all the hatches open approximately 5 cm (2 in.). Place it on a stable
surface, slightly inclined toward the front hatch, to prevent water from sitting in the mixing
chamber.

Содержание SMARTMIX A1230FD


































































































































Результаты поиска

Содержание SMARTMIX A1230FD

Отзывы:

Похожие инструкции для SMARTMIX A1230FD

Бренды по названию

Популярные бренды

Anderson SMARTMIX A1230FD, Руководство оператора

Результаты поиска

Содержание SMARTMIX A1230FD

Отзывы:

Похожие инструкции для SMARTMIX A1230FD

Бренды по названию

Популярные бренды