Anderson RBMPRO, Руководство по диагностике

Страница: 46 / 50

46
PROCEDURE REF# A-RBM-017
Side rails and rollers adjustment procedure
The side rails and rollers prevent the bales from falling to the ground
while they are loaded and during transportation. They must be adjusted
depending on the dimension of the bales.
The setting must be done so that there is 15cm (6 inches) between the
side rails or rollers and the bales.
To change the positioning of the side rails or rollers, remove the pins and
adjust them to the desired position.
Position Diameter of bales
A 1.2 m (4 ft)
B 1.35 to 1.5 m (4.5 to 5 ft)
Side rails settings (Detail A) and side rollers settings (Detail B)
Position of the side rails and side rollers depending on diameter of the bales