Tripple stack tips
40
When using the triple stack configuration, you should keep your bales as close
to each other as you can to keep the top bales sitting firmly on top.
To adjust how compact your bales are, you can adjust the sensor LS_PO_M1
and LS_PO_R.
1)
Start by loading your first bales using the automatic setting and let the bales
be pushed back by the pusher.
2)
Repeat a second time.
3)
Then, check the distance between the first load and second load.
4)
Slide the sensors using the sliding brackets, moving them closer to each other
to increase the compaction level.
PROCEDURE REF# A-RBM-025
Содержание RBMPRO
