Anderson RBMPRO 2000, Руководство оператора

Страница: 47 / 101

Anderson Group Self-loading Trailer – Operator's Manual 47
5 Operation
5.1 Controls
The control screen (see Figure 2 ) is used to operate the trailer during common operations. For
example, it is used for loading (see "Loading bales" on page 51), preparing the trailer for transport
(see "Safety tips for transport" on page 25 ), and operating all the different parts of the
trailer."Operations in manual mode" on page 61
NOTE: The width and angle of the platform are adjusted directly
with the tractor's hydraulic controls.
To carry out the various operations, you can use either the touch screen or the buttons on the
control screen. Figure 16 and Table 7 describe the functions of the control screen buttons.
Figure 16 — Control Screen Buttons
Table 7 — Control Screen Button Functions
Component Function
1 Allows you to select modes, menus and operations.
2 Simulates a bale being loaded. For testing purposes only; do not use.
3 Move the cursor to the right or left when adjusting the date and time.