Anderson RBM1400, Руководство оператора

Страница: 88 / 95

88 Operator's Manual – Self-Loading Bale Carrier Anderson Group
1. Remove the wheel bearings as described in "Lubricating the wheel bearings" on page 85.
2. Remove the outer races of the bearings, which are inside the hub (Figure 48).
NOTE: Note the positions of the outer races and grease retainers
for reassembly.
NOTE: If the axle has grease retainers, they will come out at the
same time as the outer races and will be have been
damaged as a result.
3. Insert the outer races as shown in Figure 49.
NOTE: Make sure to put the outer races and grease retainers in
the correct positions.
NOTE: If the axle has a grease retainer, first put the retainer in its
housing (in the correct direction). Make sure it is centred
and remains in place throughout the process of putting the
outer race back in.
4. Perform a final check.
Figure 48 — Outer Race