Anderson RBM1400, Руководство оператора

Страница: 29 / 95

Anderson Group Self-Loading Bale Carrier – Operator's Manual 29
l
Move any combustible materials (hay, organic matter, gasoline, etc.) away from the area
before welding.
l
Eliminate any risk of fire.
2.4.3 Electrical
l
Before starting work on the electrical system, disconnect the battery or electrical power
supply.
2.4.4 Hydraulic
A pressurized oil leak can penetrate the skin and
cause serious injury. In the event of injury, see a
physician immediately to prevent serious infection.
Do not use your hands to locate leaks in a hydraulic
line.
l
Turn off the engine and remove the key from the ignition before beginning work on the
hydraulic system.
l
Before working on the hydraulic system, ensure that it is not pressurized. Relieve the pressure
before disconnecting the hydraulic lines.
l
Before repressurizing the hydraulic lines, ensure that all the couplings are correctly tightened.
l
Check the hydraulic lines regularly and replace them if they are damaged.
l
The replacement lines must meet the manufacturer's technical requirements.
2.4.5 Tires
l
Tire repairs must be carried out by qualified personnel equipped with the appropriate tools.
l
If the air pressure is too high, the tires may explode. Use the recommended air pressure (see
"Technical specifications" on page 13).
l
Ensure that the machine is immobilized, stable and protected against accidental movement
before beginning work on the wheels. Use chocks and ensure that the lifting equipment has
sufficient lifting capacity.
2.4.6 Repairs
l
Replace worn parts with genuine parts.
l
Eliminate any defects that may compromise safety.
l
Immediately repair any leaks or damage to the equipment's hydraulic system.
l
Do not use your fingers to search for a (pressurized) hydraulic oil leak. Instead, use an object,
such as a piece of cardboard, to find the source of the leak.
l
Immediately replace any damaged or defective guards or locks. Original guards affixed to the
machine must not be removed or modified.
l
The hoses must not come from piping used in another system.
l
Immediately replace any damaged hoses.