Anderson RBM Series, Руководство оператора

Страница: 41 / 87

Anderson Group Self-Loading Trailer – Operator's Manual 41
Position Bale diameter
D 1.52 m (5 ft.)
E 1.68 m (5.5 ft.)
F 1.83 m (6 ft.)
4.4 Adjusting the forks
The distance between the inner and outer forks must be adjusted to the diameter of the bales to be
loaded.
To adjust the inner and outer forks:
1. Loosen the C bolts.
2. Remove the A and B bolts.
3. Use the D bolt to slide the fork on the tube.
4. Put the forks in the desired position (see Figure 12 and Table 9).
5. Put the A and B bolts back in.
6. Tighten the A, B and C bolts.
Figure 11 — Adjusting the Forks