Anderson RB-200 Скачать руководство пользователя страница 21

Страница: 21 / 30

Anderson Group

Round Bale Wrapper RB-200 – User Guide

NOTE:

The screen lighting will automatically turn
off after 20 seconds if the counter is not
used.

Returning to the home screen

To return to the home screen, press the

ON/OFF

key on

the left of the counter.

The data will be saved.

5.3 Programming — Advanced menu

How programming works

The advanced programming menu has four programs,
described below.

The various bale counter settings must be programmed
sequentially. You can only return to the home screen from
the fourth program.

Using programming mode

To enter programming mode, hold the

AJUST.SELECT

key

for three seconds. You can then move between programs
by pressing the

AJUST.SELECT

key.

In the programs, use the

-/+

keys to edit the number of

rotations and bales. To change the number more quickly,
hold the key for three seconds.

To reset the number to zero, hold the

-/+

keys at the same

time.

Programming the number of rotations per bale

The rotation counter allows you to set the number of
rotations of film to apply to each bale. To do this:

1. Hold the

AJUST.SELECT

key for three seconds.

The screen will display:

Enter the number of

revolutions, MAX: 00

2. Edit the number of rotations per bale by pressing

the

-/+

keys (min. 2, max. 80).

3. Press the

AJUST.SELECT

key to change programs.

The screen will display:

modify # bales Day:

000

NOTE:

Anderson Group recommends 18 rotations
with 76 cm (30 in.) plastic rolls, which
results in approximately four full layers of
film on the bale.

Programming the number of bales per day

The bale counter allows you to set the number of bales that
will be wrapped each day. To do this:

1. Edit the number of bales per day by pressing the

keys.

2. Press the

AJUST.SELECT

key to change programs.

The screen will display:

modify # bales Year:

0000

Programming the number of bales per year

The bale counter allows you to set the number of bales that
will be wrapped each year. To do this:

1. Edit the number of bales per year by pressing the

keys.

2. Press the

AJUST.SELECT

key to change programs.

The screen will display:

Language: French or

English

Changing the language

The bale counter's display language can be set to English
or French.

1. Change the language by pressing the

-/+

keys.

2. Press the

AJUST.SELECT

key to return to the

home screen.

Содержание RB-200































Результаты поиска

Содержание RB-200

Отзывы:

Похожие инструкции для RB-200

Бренды по названию

Популярные бренды

Anderson RB-200, Руководство пользователя

Результаты поиска

Содержание RB-200

Отзывы:

Похожие инструкции для RB-200

Бренды по названию

Популярные бренды