Anderson GB series, Руководство по эксплуатации

Страница: 74 / 79

74 Operation Guide – Grain bagger GB-series Anderson Group
1. Install one of the side wideners on the top of the hopper.
2. Attach with the bolts already in place.
3. Repeat the process for the second side widener.
7.2 Spray system
The spray system enables the spraying of a mix of water and preservative in the grain to control the
acidity of the silaging. The spray system is made up of a 60 US gallon (225 litres) reservoir (A) linked
by a hose to a spray tip (B) which enters into the machine. This tip sprays the liquid directly into the
grains. The spray system is equipped with a regulator (C) which enables the adjustment of the
quantity of liquid sprayed into the grains. The higher the number selected on the regulator,
the less
there will be liquid sprayed into the grains and vice versa. The spray system is activated by an
electric pump connected to the tractor electrical system. When the pump is turned on, a light goes
on, next to its switch (D).
Figure 53 – Spray system
If the spray system is ordered with the bagger, it is delivered preinstalled on the machine. If not, you
will have to install it yourself. To do so, proceed as follows:
1. Place the reservoir in its location on the bagger, between the tunnel and the roller casing, and
attach it firmly with bolts.
2. Install the spray tip, fixed at the end of the hosing, on the side of the bagger.
3. Connect the spray system electrical cable to the 12 V power source of the tractor.