Anderson GB series, Руководство по эксплуатации

Страница: 39 / 79

Anderson Group Grain bagger GB-series – Operation Guide 39
attached to the machine on one side and to the tractor on the other.
In order to mount the drive shaft, proceed as follows:
Machine side
1. Slide the drive shaft (A) on the compression screw shaft (B).
2. Install the key (C) and the cotter pin (D).
3. Attach the attachment chain hook (E) of the protective tube (F) to the bagger.
Tractor side
4. Push down the push button.
5. Slide the drive shaft on the tractor power takeoff until the push button returns to its starting
position and blocks the drive shaft on the power takeoff.
6. Connect the attachment chain hook of the protective tube to the tractor.
Figure 18 – Mounting the drive shaft
3.5 Connection of the hydraulic system
The bagger includes a hydraulic circuit.
1. Hook-up the two (2) hydraulic hoses to the tractor.
2. Check that the hoses are placed between the tractor and the bagger in order to avoid them
from tangling, getting stuck and wearing prematurely during operation.
If the connections are reversed, a check valve
will prevent any movement of the loading
screw.