The X‐Tractor system allows the user to finish the tube and empty the
wrapper.
Before you put the last bale on
the wrapper, it’s really important
to adjust the stopper of the
pusher to the closest position to
the hoop as possible.
Put the last bale to be wrapped on the wrapper and when cycle is
completed make sure that the bale is not on the pushing head of the X‐
Tractor. The system will be ready to use and you’ll avoid any damage to
the X‐Tractor cylinder.
Note:
The X‐Tractor system can only be used when the pusher has
completely returned to its home position. The pusher will only
move once the X‐Tractor is completely retracted to its home
position.
Stopper for the
pusher return
End of
X‐Tractor
Wrapped bale
End of bale bag
(open)
How to use X‐Tractor
PROCEDURE REF# A‐INL‐032
