Model Number:
IDAG065X9-Ax (x=0, 2 for PIM3 value)
Wide-band Directional MIMO Antenna, X-pol, 698-960/1710-2700MHz, 6-10dBi
Rev:2016-0-8i
*In pursuance of continual product improvement, the right to change specifications without prior notice is reserved.
2/2
Note for Installation
Thanks for choosing our product! Before exciting installation, please read this guide carefully.
Make sure qualified personnel are hired for installing this product such as working at height
with safety awareness, tools operating skills, and etc.
This is low PIM designed product and be gentle to bend the jumper cable and fasten the
connectors.
Please check the items against the below packing list and make sure the product is in good
condition without any damage and none is missing.
Check the necessary installation tools below are prepared on site before the installation.
Find proper position and the flat surface of wall to mount this antenna based on the
coverage design and planning documents.
Mounting Instruction
STEP1:
Mark the 4 drilling points by Mounting
Plate at the desired position on the wall. Drill 4
holes on the wall and tap the 4 plastic plugs
into them. Fix the Mounting Plate by screwing
the 4 tapping screws into the plastic plugs.
STEP2:
Place the Antenna on the Mounting Plate
and make sure the antenna is securely hooked up
on the Mounting Plate.
STEP3:
Joint the connectors with systems.
Packing List
List of Installation Tools
Antenna
1
Percussion Drill and
Φ
6mm bit
Mounting Plate
1
Phillips Screwdriver
St 4*25 Tapping Screw
4
6mm Plastic Plug
4
QC Check
