NOTE
: Elevate lectern when possible to project sound over listeners in front.
ADMIRAL
PORTABLE LECTERN
(A) LECTERN BASE
(C) RIGHT SIDE PANEL
(B) LEFT SIDE PANEL
(D) FRONT PANEL
(E) LECTERN SHELF
(F) LECTERN TOP
TILT-N-ROLL CASTERS
GOOSENECK SHOCK MOUNT JACK
GOOSENECK SHOCK MOUNT JACK
ADMIRAL LECTERN PARTS LIST
(A) Lectern Base . . . . . . . . . . . . . . 1 ea.
(B) Left Side Panel . . . . . . . . . . . . . 1 ea.
(C) Right Side Panel . . . . . . . . . . . 1 ea.
(D) Front Panel . . . . . . . . . . . . . . . . 1 ea.
(E) Lectern Shelf . . . . . . . . . . . . . . 1 ea.
(F) Lectern Top . . . . . . . . . . . . . . . . 1 ea.
(G) Screws . . . . . . . . . . . . . . . . . . . 13 ea.
ADMIRAL ASSEMBLY
ASSEMBLY INSTRUCTIONS
1. Place LECTERN BASE (A) on level ground with wheel side down.
2. Attach LEFT (B) and RIGHT (C) SIDE PANELS to BASE using two (2) screws per panel
3. Fit FRONT PANEL (D) into place and screw in LECTERN BASE
4. Insert SHELF (E) as shown and secure with three (3) screws
5. Position LECTERN TOP (F) and attach from below with six (6) screws
6. Connect gooseneck microphone firmly in the XLR shock mount input on LECTERN TOP (F)
Required Tools:
Phillips-Head Screwdriver
Note
: Do not use a power tool to assemble. Over-tightening the screws may cause wood to fracture.
If installing a sound system, be sure to measure it and place shelf accordingly.
CONNECTING A PORTABLE SOUND SYSTEM
After the Admiral is fully assembled:
1. Position ADMIRAL lectern upright on a flat surface
2. Place portable sound system inside the cabinet on shelf as shown
3. Connect lectern XLR cable to sound system
Note
: See your sound system manual for operational instructions.
CONNECTING AN IN-HOUSE SOUND SYSTEM
1. Connect an XLR cable to the ADMIRAL’s XLR cable (male to female)
2. Connect the other end of the XLR cable to your main audio mixer
