Trolling Motor Bracket Adapter Kit (TMB101)
Page
1
of
6
™
2021 Anchor-Caddie
Thank you for choosing Anchor Caddie and this adapter kit! It is specifically designed to be mounted on the top plate of
the most common quick release brackets by Minn Kota and Motorguide but may fit others.
Please note, if you do not have your bow mount trolling motor on a Minn Kota or Motorguide quick release bracket, you
will need 2 quick release brackets of the same exact type. 1 for your bow mount trolling motor and the other for this
adapter kit and anchor nest.
If you do already have a quick release bracket on your boat, you will need 1 more additional quick release bracket of the
same exact type for this adapter kit and anchor nest.
You can also watch the installation video on our website at www.anchor-caddie.com/support
Before attempting to install this adapter kit, please make sure that you have all the parts on the list below. If you are
missing something or have a question, please contact us immediately at 888-405-3930.
What’s
Included
What’s NOT
Included
•
Minn Kota or Motorguide quick release bracket and hardware
•
Anchor Caddie anchor nest
Tools Needed
Base Bracket (1)
Top Mounting
Plate (1)
Bottom Mounting
Plate (1)
¼-
20 x ¾”
Screw (7)
¼” Lock Washer
(7)
¼” Flat Washer
(7)
5/16-18 x 1-
1/4”
Screw (2)
5/16-18
x 3/4”
Screw (4)
5/16-18 Lock Nut (5)
•
3/16” allen wrench
•
5/32” allen wrench
•
7/16” combination wrench
•
1/2” combination wrench
•
Phillips screwdriver
•
Drill
•
1/8” & 5/16” drill bit
•
Center punch
Step 1 Hardware
Step 2, 6 & 8 Hardware
Not shown, 1 tube of anti-seize compound
