Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 78 / 164

62 Release: 2017 CyBio
®
Well vario
Operation
7.2.2 Menu [Manual]
Pipetting head
Six basic functions are available in manual control mode:

Dosing

Pipetting

Dispensing

Diluting

Tip change

Rinsing
Each individual action must be triggered by an operator. The advantage is convenience
of operation. For example, manual mode provides a straightforward means for process-
ing a single microplate.
Dosing
This basic function provides for aspiration of a specified volume of liquid and dispensing
of this volume with additional stroke:
1. Select aspiration volume.
Fig. 34: Display screen – dosing – aspiration volume
2. Move liquid-containg reservoir into position under the tips (trough, microplate).
Trigger carriage or rotary table motion for this purpose, using or as
necessary to reach the required position.
Use to raise the lifter or to lower the lifter .
Note:
With the lifter in raised position, you can press or to set the follow-
ing positions:
3. Select [Start] menu item, then confirm your selection by pressing key . This
will trigger a dosing cycle.
384X pipetting head: Motion to positions A1 to B2 for 1536 well operation
96X pipetting head: Motion to positions A1 to B2 for 384 well operation or
Motion to positions A1 to D4 for 1536 well operation