Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 105 / 164

CyBio
®
Well vario Release: 2017 89
Operation
– Only for capillary head: Disconnect compressed air supply tube from con-
nector terminal at the system, not at the head (
→
see fig. 117 ).
– Hold pipetting head at its handle with one hand.
– Slightly raise the pipetting head.
– Carefully pull the head off, supporting it with the other hand. Use recessed
handle at magazine adapter bottom for this purpose.
– Place pipetting head onto a stable support base.
Fig. 93: Retrieval of pipetting head (from the front head replacement version)
8. To insert a new pipetting head or capillary head, proceed as follows:
– Hold pipetting head at its handle with one hand.
– Use the other hand for support as you push the pipetting head in. Use the
recessed handle at magazine adapter bottom for this purpose.
– Hold head rails at the height as indicated by red markers, then push the pipet-
ting head in until mechanical stop position.
Only for capillary head:
– Connect compressed air supply tube to terminal connector at the system.
– Check for correct setting of operating pressure.
1 Handle
2 Recessed handle at adapter
bottom