Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 100 / 164

84 Release: 2017 CyBio
®
Well vario
Operation
Wells
This option can be used to select a mode for manual lifter motion adapted to a given
one out of various plate types (e.g. motion to positions of a 384 well microplate or a
1536 well microplate). The correct plate type must be set in order to guarantee that a
tip is located in the middle of its companion well.
Fig. 83: A1 well target positions for 96/384/1536 well microplate
1 A1 well target position for 96 well microplate
2 A1 well target position for 384 well microplate
3 A1 well target position for 1536 well microplate
The diagram view illustrates that the tips will come down onto the edge of wells in the
case of a faulty plate type setting.
Example:
Of a 1536 well microplate were to be processed with a 96 tip magazine, the tip would
come down in point 1 of figure 56.
Solution:
Set
1536 for plate type in [Configuration] => [Wells] menu. Perform manual motion
to A1 well position for 1536 well microplates before dispensing (point 3 in figure 56).
XY
This menu item is intended for storing internal XY correction values for lifter motion. In
the event of necessary lifter replacement (according to manufacturer specification pro-
vided on lifter underside), you can update your lifter settings here.
Fig. 84: Display – XY correction values
The first entries in a line indicate the direction. The coordinates for zero point (nn) cor-
respond to those of a 96 well microplate.
The path, however, represents the distance to a 384 well or 1536 well in the corre-
sponding coordinate direction (refer to details on underside of lifter).
On selection of a coordinate, the lifter moves to the assigned position and can thus be
easily inspected for correct adjustment. A microplate of transparent material is recom-
mended for lifter adjustment.
1
2
3