2
INTRODUCTION
All new Current Mode switching design offers increased power and reliability in a compact package.
Extra input and output filtering reduce EMI to extremely low levels. Reliability features include an
input fuse, thermal shutdown, current limiting and output short circuit shutdown with automatic
recovery. The output voltage is easily adjusted 0.5 volts above or below the standard output voltage.
The model PWS610 Power Supply supplies either 12, 24 or 48 VDC from a 110 or 220 VAC power
source. 1 or 2 high quality analog meters can be added (factory option) to allow monitoring of
charging current and charging voltage. Other output voltages up to 72 volts are also available by
special order.
SPECIFICATIONS
PWS610-ip-op
Input Voltages
Nominal (ip)
110Vac
220Vac
Actual
105 - 125Vac
210 - 250Vac
Input Amps (max)
8.1
4
Input Fuse (MDA)
12
6
Output Voltages
Nominal (op)
12Vdc 24Vdc 48Vdc
Actual
13.6
±
0.05Vdc
27.2
±
0.05Vdc
54.4
±
0.10Vdc
Adjust
±
0.5
Output Crowbar
16.0
±
0.5 Vdc
32.0
±
1.0 Vdc
63.9
±
2.0 Vdc
Output Amps (cont)
40 20 10
Output Amps (max)
45 25 12.5
Transient Response
< 1 V for 30A
< 1 V for 20A
< 1 V for 9.5A
General
Input Frequency
45 - 65 Hz
Noise on Input
< 50 milli-Volts
Noise on Output
< 50 milli-Volts
Efficiency
> 80 % @ maximum output
Temp. Range
0 – 40 deg. C @ maximum output
Isolation
Input-Output & Input-Case 1500VDC
Isolation Output-Case
500VDC
Length
14.5 in / 36.8 cm
Width
10.2 in / 25.9 cm
Height
3.0 in / 13.0 cm
Clearance
1 Inch (2.5 cm) all around
Material
Marine Grade Aluminum
Finish
Black Powder Epoxy
Fastenings 18-8
Stainless
Weight
7.2 lb / 3.3 kg
designed and manufactured by:
ANALYTIC SYSTEMS WARE (1993) LTD.
#207 12448 82 Ave. Surrey, B.C., V3W 3E9, Canada
phone (604) 543-7378
fax (604) 543-7354
toll free 800-668-3884 US/Canada
email: [email protected]; web site: www.analyticsystems.com Rev.
Oct
2000
Specifications subject to change without notice.
