Analytic Jena InnuPure C16 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 62

Analytic Jena InnuPure C16 Скачать руководство пользователя страница 43

Operation

InnuPure C16

Edition 06/2015

41

ATTENTION!

Sample names are limited in length to a maximum of 32 characters. If this length is exceed-
ed, the corresponding names are truncated after the 32th character by the sample setup tool
when the setup is opened!

When specifying the equipment populated in the tray, pay attention to the exact character
sequence of the three possible equipment types. An incorrect entry automatically sets the
corresponding tray side to "None"!

Do not change the first line of the setup, otherwise it will not be possible to recognize or open
the setup!

An example of a completed setup with the sample configuration from section "Creating and
saving a sample setup via the HID-Pro 320" p.37:

Figure 12 Sample setup created by PC/laptop

A sample setup can also be loaded directly in the sample setup tool from a USB stick, inde-
pendently of user rights.

Loading a sample setup via the HID-Pro 320

While using the sample setup tool, a previously saved setup can be loaded using the [L

OAD

]

button.

This also applies to setups which have been created using a laptop/PC and stored on the SD
memory card of the HID-Pro 320 or a connected USB stick.

ATTENTION!

All setup entries that have not been previously saved are automatically lost when a sample
setup is loaded!

«
...
41
42
43
44
45
...
»

Содержание InnuPure C16































































Отзывы:

Нет отзывов