ANALOX Sub Mk III F, Руководство пользователя

Страница: 68 / 79

Sub MkIIIF
User Manual
Int. Approved
Document ref: ASF3-800-08 November 2018 Page 68 of 79
Copyright © 2009 Analox Ltd. All Rights Reserved.
Commercial in Confidence
12 Maintenance
It is essential to calibrate the gas sensors regularly to ensure their correct operation. It is
recommended that the system is calibrated prior to use.
Pressure, temperature and humidity sensors require less frequent calibration than the gas sensors.
Simple comparison checks with the Master Gauges during use will reveal faults with the pressure
sensors. In the event of a discrepancy, the sensors should be re-calibrated. It is expected that a
pressure calibration may only be required on an annual basis, but it is important to perform the
regular checks (e.g. on each use) to identify faults.
12.1 Replacement Parts
Item Description Part No Suggested
Frequency of
Replacement
1 Analox MIR CO2 Bench 100mbar MIRDJNX4S 5 years
2 Analox MIR CO2 Bench 20mbar MIRAGNX4S 5 years
3 Analox MIR CO2 Bench 25mbar MIREGNX4S 5 years
4 Analox MIR SS CO2 Bench 20mbar in
Helium MIRASHX4S 5 years
2 Analox Hyperbaric/Hypobaric Oxygen
Sensor 0 to 600mbar pO2 (hypobaric), 0
to 1500 or 2000mbar pO2 (hyperbaric)
ranges 9100-9212-9HSUBA 2 years
3 Analox Hyperbaric Oxygen Sensor 0 to
3000mbar pO2 ranges 9100-9212-9H3 2 years
4 Analox REM2 Replacement Temperature/
Humidity Sensor DD1TUPHAT02 5 years
5 Immersible breather Vent SA2 XMRCBL/D6693 5 years
6 MkIII Operator Console LCD display
module
*
2553-9200S 5 years
7 Replacement battery – Operator Console
Real Time Clock (2 required per console)
9430-4794 5 years
*
The Console must be returned to Analox for replacement
12.2 Accessories
Item Description Part No
1 Calibration Gas Contact Analox for exact requirements
2 Flow or pressure regulators and flow meters Contact Analox for exact requirements
3 Humidity Calibrator 0% RH and 75% SA1P16RH
4 Push in flow adaptor 8000-0069A
5 Calibration tubing – neoprene (Qty of 1m) 1817-5000