ANALOX ACG+, Руководство по обслуживанию и устранению неисправностей

Страница: 9 / 37

ACG+
Service & Troubleshooting Manual
Int. Approved
Document ref: P0149-825-00 October 2022 Page 9 of 37
Copyright © 2022 Analox Ltd. All Rights Reserved.
Commercial in Confidence
3 Recommended spares and accessories
Table 2 List of spares
Item Description Part no.
1 VOC in-line filter (6mm inlet/outlet) 6000-0096
2 Internal particulate filter 2533-1008
3 MEC O
2
full sensor module MECO2ABAP
4 MEC O
2
cell (electrochemical) 9100-9212-9HM
5 MEC CO full sensor module MECCOEBAP
6 MEC CO sensor PCB MEC-233B
7 MEC CO cell (electrochemical) 9100-2030S
8 MEC VOC full sensor module MECVOCBAP
9 MEC VOC cell (PID) 9100-2060S
10 MEC VOC sensor PCB MEC-233C
11 Water vapour sensor 6000-0094
Replacement VOC sensor parts
12 Disposable electrode stack 9100-2060/ES
13 10.6 eV replacement lamp 9100-2060/LP
14 Replacement spring 9100-2060/SP
Service parts
15
5S3 CO
2
full sensor module (0-1000ppm
range)
A5S3ASN8A (See note below)
16
5S3 CO
2
full sensor module (0-10000ppm
range)
A5S3ALN8A (See note below)
17
ACG+ Display Module – Configured for
CO
2
, O
2
, CO, VOC and water vapour
ACGSDA/1 (See note below)
18
ACG+ Display Module – Configured for
CO
2
, O
2
, CO and VOC
ACGSDA/2 (See note below)
19
ACG+ Display Module – Configured for
CO
2
, O
2
, CO and water vapour
ACGSDA/3 (See note below)
20
ACG+ Display Module – Configured for
CO
2
, O
2
, CO
ACGSDA/4 (See note below)
21
Replacement oring for sensor flow
adaptor 2323-0017X
NOTE: ACG+ TO BE RETURNED TO ANALOX FOR REPLACEMENT OR
SERVICE