Installation Procedure for bkSpecto
IG42955-03
16-01724 rev 00
9/16
8
Setting Up Printer Start-up Kit (Optional – UA4104)
The printer is placed below the touch display in a printer holder.
1. Remove 1 screw with a torx #20 and remove the lid.
Scanner Overview
Procedure
Note:
Remember to support the cover while removing the screw
2. Cut off the zip tie.
3. Gently pull out the USB cable and the power cable.
CAUTION:
Do not pull too hard making sure not to damage the system.
4. Mount the four screws with washer head. Leave some space
for the printer holder.
CAUTION:
If the screws are fastened too much it is not possible to slide on the printer holder.
5. Slide on the printer holder and fasten the screws using the enclosed torx
key.
