VIO1600 & ULTRA VIO
PAGE 15
Chapter 3 : OPERATING MODE
3-1. SETTINGS
c
We recommend resetting the device to all of its
default values
, with the front panel display
menu (
CONTROL >
default value > yes
) before proceeding.
d
Select the
input type
connected to the
INPUTS
with the front panel display menu (
INPUT > input type
).
e
Select the
output
type & format
which corresponds to your display device with the front panel display menu
(
OUTPUT > output type
).
f
Select one of the
output rate
available with the front panel display (
OUTPUT > output rate
).
g
For computer source, select the
output sync
type with the front panel display (
OUTPUT > output sync
).
3-2. DISPLAY DEVICE ADJUSTMENTS
c
Display the
grid pattern
with the front panel display menu (
OUTPUT > test pattern > grid
).
d
Display a black output.
e
Adjust directly the display device itself, using its position and size controls, to fill the grid pattern in full screen.
3-3. IMAGE ADJUSTMENTS
For each input source connected to the device, make the following adjustments:
c
Select the source you want to adjust (with the front panel "INPUT SELECTION" buttons).
d
Select the aspect ratio of your input source with the screen menu (
IMAGE > aspect ratio in
).
e
Display the centering pattern (
OUTPUT > test pattern > centering
) and use the
Centering
function (
IMAGE >
centering
) to automatically position the image in the
Centering
pattern
.
IMPORTANT:
For best results, display a full size bright image (no black border) to perform a centering. If
necessary, correct the adjustment with the position & size functions (
IMAGE > pos settings
).
NOTE:
The
Image Centering
function is only available for computer sources.
NOTE:
In case of same Input/Output resolution, the centering also achieves automatic pixel clock adjustments. It
may be useful, to improve manually the pixel
clock
and
phase
using the screen menu (
IMAGE > optimize
> clock or phase
).
f
If needed, make the others adjustments, available in the screen
IMAGE
menu (color, brightness…).
NOTE:
To set the image adjustments to the factory settings, use the
Preset
function (
IMAGE > preset > yes
).
NOTE:
The adjustments are automatically stored in NON-volatile memories. The VIO1600 & ULTRA VIO are
provided with 40 NON-volatile image memories. Each of these memories contains the input channel
number, the input and output format parameters and all of the image adjustments (position, size,
brightness...). When the 40 memories are used, each new memorization erases the oldest record.
3-4. AUDIO ADJUSTMENTS
c
Adjust the master volume (
AUDIO > master volume
).
d
For each audio input, adjust the level (
AUDIO > audio level
) and the balance (
AUDIO > audio balance
).
