REMOTE KEYPAD FOR SMART FADE™
PAGE 6
Chapter 2 :
TECHNICAL DESCRIPTION
INPUTS
:
Computer and video input selection.
Pre-select an input with its corresponding push button (LED = blinking) and push on the CUT
button to display the input (LED = ON).
AUDIO MUTE
:
Switch to turn OFF the audio output.
EFFECT:
Switching effect selection. See Chapter 3 :OPERATING MODE.
(CUT / FADE / TITLE)
TAKE
:
Switches between 2 input sources. See Chapter 3 :OPERATING MODE.
SELECT
:
IMAGE ADJUST
selection (Short push).
IMAGE PRESET
(Long push = 3 seconds), allows to recall the factory values of the
CONTRAST, BRIGHTNESS and HUE for the selected (displayed) input.
-, +/ON
:
Push buttons to increase or decrease the level of each image adjustments.
MIN / MAX
LED:
•
LED ON = Adjustments' limits have been reached,
•
LED BLINKING = Level is increased or decreased.
IMAGE ADJUST
:
Adjustments are active only for the selected (displayed) Video input. Choose an adjustment
with the SELECT button and control the level with the - & +/ON switches :
•
CONTRAST:
Contrast adjustment.
•
BRIGHTNESS: Brightness adjustment.
•
HUE:
Tint of picture (NTSC only) adjustment.
•
AUDIO OUT:
Main audio level adjustment (MASTER VOLUME).
•
FADE DELAY: Fading time adjustment (0.5, 1, 2, 3, 4, 5 sec.).
•
BREAKAWAY: LED "ON (+)" is OFF
⇒
Auto follow mode, LED "ON (+)" is ON
⇒
The audio of the selected input is permanently diffused.
MANUAL FADE
:
2 Push buttons to manually Fade between two input sources.
NOTE:
The CONTRAST, BRIGHTNESS, and HUE are not available for a selected computer input (displayed).
NOTE:
Pushing quickly on the -/+ push buttons allows to quickly move the adjustments (5 by 5 steps).
