Chapter 1 : INTRODUCTION (continued)
OCTO
²
/ QFX402
PAGE 12
1-8. OCTO
²
REAR PANEL DESCRIPTION
100-250 VAC, 1A, 50-60 Hz:
AC power inlet.
O / I:
AC power switch (O = OFF, I = ON).
IP/LAN:
LAN communication port on a RJ45 connector (optional).
RS-232:
RS-232 communication port on a DB9 female connector.
7 UNIVERSAL COMPUTER & TV/HDTV INPUTS:
1:
Universal (computer and video) input on a DVI-I female connector.
NOTE:
This input accept analog & digital Computer source.
2 to 6:
Universal (computer and video) inputs on a HD15 female connector.
7:
Universal (computer and video) input on HD15 and 2xBNC female connectors.
NOTE:
All the universal inputs accept the following video source: Composite Video, S-Video, SD-YUV, RGBHV,
RGBS, RGsB &HD-YUV (HDTV)
DISPLAY OUTPUTS:
DVI:
Digital & analog output on a DVI-I female connector.
ANALOG:
Analog output on a HD15 female connector.
AUDIO:
1 & 2:
Unbalanced stereo audio input #1 & #2 on jack 3.5 female connectors.
3 to 6:
Unbalanced stereo audio input #3 to #6 on MCO male connectors.
7:
Balanced stereo audio input #7 on a MCO male connector.
AUX:
Balanced stereo auxiliary audio input on a MCO male connector.
OUT:
Stereo audio output (balanced & unbalanced) on a MCO male connector.
T12 V:
A room (+ 12 Vdc trigger) command (3.5 mm jack female), allows to control external
functions such as up/down screen, lighting...
