Analog Devices VISUALDSP++ 3.5, Руководство пользователя

Страница: 21 / 166

Vi+ 3.5 Loader Manual 1-1
for 16-Bit Processors
1 INTRODUCTION
The majority of this manual describes the loader program (or loader util-
ity) as well as the process of loading and splitting, the final phase of a DSP
application program’s development flow. The process of initializing
on-chip and off-chip memories, is often referred to as booting.
The majority of this chapter applies to all 16-bit processors. Information
applicable to a particular target processor, or to a particular processor fam-
ily, is provided in the following chapters.
• Chapter 2, “Blackfin Processor Loader/Splitter” on page 2-1
• Chapter 3, “ADSP-219x DSP Loader/Splitter” on page 3-1
• Chapter 4, “ADSP-2192-12 DSP Loader” on page 4-1
• Chapter 5, “ADSP-218x DSP Loader/Splitter” on page 5-1
Program Development Flow
The flow can be split into three phases:
1. “Compiling and Assembling”
2. “Linking”
3. “Loading and Splitting”
A brief description of each phase is as follows.