Analog Devices HPPCI, Руководство пользователя

Страница: 31 / 41

HPUSB, USB, and HPPCI Emulators User’s Guide 2-5

Hardware Description
Mechanical Specifications
HPPCI-ICE
The HPPCI-ICE consists of a daughter board and a pod cable. The system
is compliant with revision 2.2 of the PCI specification and plugs into
5V-only motherboards. It uses only the 5 volts from the PC’s PCI slot.
The pod cable consists of a small PCB that has a multi-conductor cable
soldered at each end. The multi-conductor cable is constructed with indi-
vidual coaxial cables that are encapsulated by shield ground. The PCB in
the pod is fully enclosed in a copper-sprayed plastic enclosure. The
multi-conductor cables and copper spray reduce system noise and electro-
magnetic interference. The mechanical dimensions of the daughter board,
pod cable assembly, and pod enclosure are shown in
Figure 2-3 ,
Figure 2-4 , and Figure 2-5 , respectively. Unless specified, all dimensions
are in inches.