Analog Devices HPPCI, Руководство пользователя

Страница: 11 / 41

HPUSB, USB, and HPPCI Emulators User’s Guide 1-1

1 GETTING STARTED
This chapter provides the information needed to begin using Analog
Devices USB- and PCI-based emulators.

Analog Devices emulators are not intended to be used in a
production environment.
This chapter includes the following sections.
• “Contents of Emulator Package” on page 1-2

Provides a list of the components that are shipped with USB-
and PCI-based emulators.
• “PC Configuration” on page 1-2

Describes the minimal PC requirements.
• “Installation Tasks” on page 1-3

Provides a step-by-step procedure for setting up the emulator
hardware.
• “Attaching the Cable to the Emulation Target” on page 1-6

Describes how to connect USB and PCI emulators to your target
board.
• “JTAG Frequency Selection” on page 1-8

Describes how to change the JTAG frequency.
• “HPPCI JTAG I/O Voltage Detection” on page 1-10

Describes the JTAG I/O voltage detection feature of the emulators.