Analog Devices EZ-KIT Lite ADSP-BF707, Системное руководство

Страница: 26 / 85

Evaluation License
1-8 ADSP-BF707 EZ-KIT Lite Evaluation System Manual
Evaluation License
When starting CCES for the first time, you will be prompted to install
either a 90-day evaluation license or a permanent, full license. To auto-
matically install an unrestricted 90-day evaluation license, select “I do not
have a serial number and would like to evaluate the product”. If the evalu-
ation license is installed but not activated, it allows 10 days of unrestricted
use and then becomes disabled. The license can be re-enabled by activa-
tion. Once activated, the evaluation license offers 90 days of unrestricted
use and then becomes permanently disabled.
An evaluation license can be upgraded to a full license. Licenses can be
purchased from:
• Analog Devices directly. Call (800) 262-5645 or 781-937-2384 or
go to:
http://www.analog.com/buyonline
.
• Analog Devices, Inc. local sales office or authorized distributor. To
locate one, go to:
www.analog.com/adi-sales
.

The EZ-KIT Lite hardware must be connected and powered up to
use CCES with a valid evaluation or full license.
DDR2 Memory
The ADSP-BF707 processor connects to a 2Gb Micron MT47H128M16
chip through the Double Data Rate Synchronous Dynamic Ran-
dom-Access Memory (DDR2 SDRAM) controller. The DDR2 memory
controller on the processor and the DDR2 memory chip are powered by
the on-board 1.8V regulator. Data is transferred between the processor
and DDR2 on both the rising and falling edges of the DDR2 clock. The
DDR2 controller on the processor can operate at a maximum clock fre-
quency of 200 MHz.