manualshive.com logo in svg

Analog Devices EZ-KIT Lite ADSP-BF533, Руководство пользователя, Страница: 17 / 108

Поделиться
Скачать
Analog Devices EZ-KIT Lite ADSP-BF533 Скачать руководство пользователя страница 17

ADSP-BF533 EZ-KIT Lite Evaluation System Manual

xvii 

Preface

• Send questions by mail to

Analog Devices, Inc.

One Technology Way

P.O. Box 9106

Norwood, MA 02062-9106

USA

Supported Processors

The ADSP-BF533 EZ-KIT Lite evaluation system supports ADSP-BF533 
Blackfin Analog Devices embedded processors.

Product Information

You can obtain product information from the Analog Devices website, 
from the product CD-ROM, or from the printed publications (manuals).

Analog Devices is online at 

www.analog.com

. Our website provides infor-

mation about a broad range of products—analog integrated circuits, 
amplifiers, converters, and digital signal processors.

MyAnalog.com

MyAnalog.com is a free feature of the Analog Devices website that allows 
customization of a webpage to display only the latest information on 
products you are interested in. You can also choose to receive weekly email 
notification containing updates to the webpages that meet your interests. 
MyAnalog.com provides access to books, application notes, data sheets, 
code examples, and more.

Содержание EZ-KIT Lite ADSP-BF533













































































































Отзывы:

Нет отзывов