background image

 

Evaluation Board User Guide 

UG-649 

One

 Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com 

 

Advantiv EVAL-ADV8005-SMZ Video Evaluation Board 

 

 
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT  
WARNING AND LEGAL TERMS AND CONDITIONS.

 

Rev. PrB | Page 1 of 9 

FEATURES 

Primary Inputs: 1 HDMI (HDCP) 
Secondary Inputs: 1 HDMI (HDCP)  
    (the board also  includes VGA input and Component input 

but these are not currently supported by the SW driver) 

Outputs: 1 HDMI 

ADDITIONAL EQUIPMENT/SOFTWARE NEEDED 

Computer with RS-232 I/O for: 

Sending commands to the software driver and viewing 

debug messages from the software driver 

Reading/writing registers using the AVES3 application for 

Windows (requires Windows 7 or higher) 

Updating the software driver (if desired or necessary) 

GENERAL DESCRIPTION 

The Advantiv® EVAL-ADV8005-SMZ video evaluation board 
(AVEB) is a low cost solution for evaluating the performance of 
the ADV8005 video signal processor. 

The evaluation board provides a Blackfin® 

ADSP-BF524

 processor 

for system control and includes a software driver (firmware) 
that provides a serial command interface to control the board's 
functionality.  

This evaluation board includes High-bandwidth Digital 
Content Protection (HDCP) technology and is only available 
to licensees of HDCP. 

  

 

PHOTOGRAPH OF EVALUATION BOARD 

 

Figure 1. Advantiv EVAL-ADV8005-SMZ Video Evaluation Board 

Содержание EVAL-ADV8005-SMZ v










Отзывы: