ADV7282-M Installation Guide
Rev. A, March 2013
8
Figure 3. Installation Destination for DVP Eval Program
5.
Restart your computer after the DVP Eval program is installed.
2.4.
LOAD THE ADV7282-M SCRIPT FILES
This section describes how to load the ADV7282-M script files to the DVP Eval program.
1.
Open the ADV7282-M folder that you downloaded from the ADI FTP site.
2.
Open the Software for Rev.A Evaluation Board folder in the ADV7282-M folder.
3.
Copy the folder called ADV7282M_CUST to the following directory:
C:\Documents and Settings\
USER_NAME
\My Documents\Analog Devices\DVP Eval Latest Source 10-14-11\xml\New Boards.
Note
: This directory may be slightly different depending on where you installed the DVP Eval program.
4.
To open the DVP Eval program, select Start -> Analog Devices -> DVP Eval Latest Source 10-14-11.
5.
Select File -> Update Boards.
Figure 4. Update Board Files on DVP Eval Program
A number of black command prompt windows appear and then disappear. Finally, a window appears with the message “update
boards successful”. Press the
OK
button.
The ADV7282-M script files have been added to the DVP Eval program.
6.
Exit the DVP Eval program.