Analog Devices EVAL-ADMV4630, Руководство пользователя

Страница: 1 / 11

User Guide | EVAL-ADMV4630
UG-1642
Evaluating the ADMV4630 14.0 GHz to 14.5 GHz, SATCOM, Ku-Band Upconverter
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS. Rev. A | 1 of 11
FEATURES
►
Fully featured evaluation board for the ADMV4630
►
On-board SDP-S connector for SPI control
►
Simplified power-up with on-board LDO regulators
►
5 V operation
►
ACE software interface for SPI control
EVALUATION KIT CONTENTS
►
EVAL-ADMV4630Z evaluation board
►
Mini USB to USB cable
►
SDP-S controller board
EQUIPMENT NEEDED
►
5 V dc power supply
►
DC clips
►
RF signal generator
►
Spectrum analyzer
►
Power supply cables, 2.92 mm coaxial cables
►
PC for ACE software
DOCUMENTS NEEDED
►
ADMV4630 data sheet
SOFTWARE NEEDED
►
ACE software
►
ADMV4630 plugins
GENERAL DESCRIPTION
The evaluation board incorporates the ADMV4630, low dropout
(LDO) regulators, and the EVAL-SDP-CS1Z ( SDP-S ) controller
board to allow simplified, efficient evaluation of the ADMV4630. The
SDP-S controller board allows the configuration of the ADMV4630
register map through the Analysis, Control, Evaluation ( ACE ) soft-
ware. The LDO regulators allow the EVAL-ADMV4630Z to be pow-
ered by a 5 V single supply.
The ADMV4630 is a Ku-band upconverter optimized for various
satellite communication (SATCOM) user terminals operating in the
14.0 GHz to 14.5 GHz frequency range. The ADMV4630 upconvert-
er comes in a compact, thermally enhanced, 6 mm × 6 mm, 40-lead
frame chip scale package (LFCSP). The ADMV4630 operates over
the −40°C to +85°C case temperature range.
For full details on the ADMV4630, see the ADMV4630 data sheet,
which must be consulted in conjunction with this user guide when
using the EVAL-ADMV4630Z.
EVALUATION BOARD PHOTOGRAPH
Figure 1.