UG-2017
Evaluating the ADAU1860 Three ADCs, One DAC, Low Power Codec with Audio DSPs
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | 1 of 26
EVALUATION KIT CONTENTS
►
EVAL-ADAU1860EBZ evaluation board
►
USB cable with micro USB plug
►
mIDAS-Link emulator
DOCUMENTS NEEDED
►
►
EVAL-ADAU1860EBZ user guide
GENERAL DESCRIPTION
This user guide explains the design and setup of the EVAL-
ADAU1860EBZ evaluation board.
The EVAL-ADAU1860EBZ provides access to all the analog and
digital inputs and outputs on the ADAU1860. The ADAU1860 core
is controlled by Analog Devices, Inc., Lark Studio
™
software, which
interfaces to the EVAL-ADAU1860EBZ via a USB connection. In
addition, users can communicate and debug with the Tensilica HiFi
3z DSP core through the JTAG port by using the mIDAS-Link
emulator. The
software development kit (SDK)
is also provided by
Analog Devices for code development.
The EVAL-ADAU1860EBZ can be powered by the USB bus or by a
single 5 V supply. These supply options are regulated to the voltag-
es required on the EVAL-ADAU1860EBZ. The printed circuit board
(PCB) is a 4-layer design, with a ground plane and a power plane
on the inner layers. The EVAL-ADAU1860EBZ contains connectors
for external microphones and speakers. The master clock can be
provided externally or by the on-board 24.576 MHz oscillator.
EVAL-ADAU1860EBZ BOARD PHOTOGRAPH
Figure 1.
Analog Devices is in the process of updating documentation to provide terminology and language that is culturally appropriate. This is a process
with a wide scope and will be phased in as quickly as possible. Thank you for your patience.
