UG-867
EVAL-AD5629RSDZ/EVAL-AD5669RSDZ User Guide
Rev. 0 | Page 14 of 14
ORDERING INFORMATION
BILL OF MATERIALS
Table 3.
Qty. Reference
Designator Description
Manufacturer
Part
Number
1
6
C1, C5, C6, C8, C10, C19
Capacitors, 100 nF, 50 V
Murata
FEC 8820023
2
C2, C9
Capacitors, 10 μF, 10 V
AVX
FEC 197130
1
C7
Capacitor, 1 μF, 10 V
Yageo
FEC 3188840
1
J2
2-pin terminal block (5 mm pitch)
Camdenboss
FEC 151789
1
J3
120-way female connector, 0.6 mm pitch
Hirose
FEC 1324660 or Digikey
H1219-ND
5
J4, J6 to J9
Straight PCB mount, SMB jacks
TE Connectivity/Greenpar
FEC 1206013
5
LK1, LK5 to LK8
Jumper blocks using 3-pin SIP header
Harwin
FEC 1022248 and 150410
9
LK2 to LK4, LK9 to LK14
2-pin jumper blocks, 0.1" spacing
Harwin
FEC 1022247 and 150411
2
R1, R2
2.2 kΩ SMD resistors
Multicomp
FEC 9330402
2
R4, R5
100 kW, SMD resistors
Panasonic
FEC 1577611
11
TP1 to TP11
Red test points
Vero
FEC 8731144 (Pack)
1
U3
32 kΩ, I
2
C, serial EEPROM
Microchip
FEC 1331330
1 U4
2
Octal, 16-bit DAC
Analog Devices
AD5669RBRUZ-2
1 U4
2
Octal, 12-bit DAC
Analog Devices
AD5629RBRUZ-2
1
U6
Low dropout voltage reference
Analog Devices
REF195ESZ
1
U7
Matrix switch/multiplexer
Analog Devices
ADG728BRUZ
1
U8
4-channel, 12-Bit ADC
Analog Devices
AD7991YRJZ-0
1
FEC is Farnell Electronics Components.
2
The
AD5669RBRUZ-2
is supplied on the
EVAL-AD5669RSDZ
evaluation board. The
AD5629RBRUZ-2
is supplied on the
EVAL-AD5629RSDZ
evaluation board.
I
2
C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors).
ESD Caution
ESD (electrostatic discharge) sensitive device
. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set
forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have
read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”),
with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary,
non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and
exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer
shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any
entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation
Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any
portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board
to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or
alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply
with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the
Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT
TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE
FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS,
DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer
agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING
LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this
Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations
Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG13430-0-9/15(0)
