EVAL-AD5592RSDZ User Guide
UG-753
Figure 7. DAC Tab
Figure 8. ADC Tab
GPIO TAB
The GPIO tab allows the user to set the output levels for pins set
as general-purpose outputs and read the levels of pins set as
general-purpose inputs.
SIMPLE CONTROLS
The simple controls tab allows the user to enter 16-bit values
directly into the Write Array control. These values can then be
written to the
AD5592R
by clicking the Write and Read button.
Data that appears on the SDO pin of the
AD5592R
is shown in
the Read Array control. Note that the data displayed in the
Read Array control will be invalid if it is not part of a read
operation from the
AD5592R
. Any commands sent to
the
AD5592R
that change the configuration of the
AD5592R
will not be reflected in the other tabs.
Rev. 0 | Page 9 of 13
