Analog Devices EV-SC598-SOM, Руководство пользователя

Страница: 11 / 33

Boot Mode Select
S1
S2
Reset Button
JP1
Power
Selection
)
Figure 2-2: Default Hardware Setup
CrossCore Embedded Studio (CCES) Setup
Information on using the CCES tools is available at: https://analog.com/cces-quickstart
Debug Interface
The EV-SC598-SOM provides a JTAG connection via P6 . This is for attaching an emulator, such as the ICE-1000
or ICE-2000 to for debugging.
When the EV-SC598-SOM is connected to a carrier board the Debug Agent on the carrier board can be used. To use
this Debug Agent, all postions on SW1 (on the carrier board) must be in the ON position. If an emulator, such as
the ICE-1000 or ICE-2000, is used instead all postions on SW1 must be in the OFF position.
Board Power
CrossCore Embedded Studio (CCES) Setup
2–4
EV-SC598-SOM
®
Manual